Sulfur Concentration in Nanoporous Alumina Membrane

Nanoporous alumina membrane prepared by anodic oxidation using sulfuric acid electrolyte was subjected to TG-DTA and X-ray Photoelectron Spectroscopy (XPS or ESCA) to further study the distribution of sulfur. In XPS study, Ar⁺ ion bombardment was performed on the sample to etch the surface at a rate of 3 nm min^-1. As a result, sulfur was found to be concentrated within a depth of 3nm from the surface. The S content of the surface was found to be 2.7±0.5 wt%, and that at a depth of ca. 3 nm and ca. 10 nm was found to be as low as about 0.6±0.11 wt% (5.37±1.0 wt%→ 1.26±0.2wt% SO₂). In TG-DTA, the mass loss of 7.3% was in fair agreement with that calculated on XPS results (7.1±1.2%). This revised version was published online in July 2006 with corrections to the Cover Date.     

Low-temperature magnetoresistance due to weak localization in lightly doped semiconductors

The first observation of low-temperature magnetoresistance (MR) of interference nature in the case of a light doping is reported. The MR occurs in n- and p-type Ge samples at a frequency of 10 GHz at temperatures below 30 K in weak magnetic fields on the background of the classical MR effect associated with electrons in different valleys (n-Ge) and with heavy and light holes (p-Ge).     

Adsorption of the Cu<Superscript>2+</Superscript> ions from aqueous solutions on the active carbon oxidized with hydrogen peroxide and impregnated with nitrogen-containing compounds

Adsorption of the copper ions from aqueous solutions, benzene, and water on the active carbon obtained by chemical activation from walnut shells was studied. The active carbon was additionally oxidized with hydrogen peroxide and then impregnated with nitrogen-containing compounds. As a result of impregnation with melamine, a secondary porosity is formed within the oxidized active carbon, leading to an increase in the specific surface of the sorbent. A modified carbon surface is heterogeneous, and the carbons themselves exhibit catalytic activity in the oxidation of luminol and decomposition of hydrogen peroxide.     

Two Stage Solid Phase Extraction with Subsequent HPLC Isolation for Structure Elucidation of Major Metabolites of (+)-(R)-2-{3-(benzo[1,4]dioxan-2-yl-methylamino)-1-propyl}-3(2H)-pyridazinone (GYKI-16084)

GYKI-16084 – (+)-(R)-2-{3-(benzo[1,4]dioxan-2-yl-methylamino)-1-propyl}-3(2H)-pyridazinone hydrochloride – is a new drug candidate for the treatment of benign prostatic hyperplasia. In our study the major metabolites formed in the rat and dog were isolated from dog and rat urine, then their structures were elucidated by means of MS and NMR. A two stage solid phase extraction (SPE) procedure and a semi-preparative HPLC method were developed utilizing various mechanisms of separation. The major metabolites proved to be isomeric glucuronides of the benzodioxane moiety hydroxylated at positions 6 or 7 and {2-(2-carboxyethyl)-3(2H)-pyridazinone}.     

Similar quartz crystallographic textures in rocks of continental earth’s crust (by neutron diffraction data): II. Quartz textures in monophase rocks

The types of quartz textures found in a large collection of multiphase rocks from different regions of the earth are analyzed. Crystallographic textures of granulite, amphibolite, slate, and gneiss samples are measured, classified, and compared with the similar textures of monomineral rocks.     

Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.     

Coexisting antiferromagnetism and ferromagnetism in mechanically alloyed Fe-rich Fe–Ni alloys: implications regarding the Fe–Ni phase diagram below 400°C

Fe–Ni alloys below the Invar region with compositions Fe_100−xNi_x (x=21, 24, and 27 at%) were prepared by high-energy ball milling technique (mechanical alloying). The as-milled samples, characterized by X-ray diffraction and Mössbauer spectroscopy, contain a mixture of (BCC) and γ (FCC) phases, whereas the samples annealed at 650°C for 0.5 h show a single γ (FCC) phase displaying a single line Mössbauer spectrum at room temperature (RT). At low temperature, the Mössbauer spectra of annealed Fe₇₆Ni₂₄ and Fe₇₃Ni₂₇ alloys show the existence of a magnetically split pattern together with a broad singlet, which are ascribed to a high-moment ferromagnetic Ni-rich phase and a low-moment Fe-rich phase, respectively. The Fe-rich phase in annealed Fe₇₆Ni₂₄ alloy, which is paramagnetic at RT, undergoes antiferromagnetic ordering at 40 K, estimated from the dramatic line broadening of its spectrum, giving rise to a small hyperfine field (e.g. 2 T at 6 K). The coexistence of these phases is attributed to phase segregation occurring in these alloys as a result of enhanced atomic diffusion. The stability of these alloys towards martensitic (FCC→BCC) transformation at low temperatures is discussed in connection with the Fe–Ni phase diagram below 400°C.     

Deformation of a shallow shell of revolution into a circular plate

If the curvature of a shell changes under the action of an external force, then the shell can enter a strain state in which it acquires the shape of a plate. In the framework of physical and geometrical linearity, we suggest a solution of the axisymmetric problem about the stress-strain state of a shallow shell of revolution transformed into a circular plate.